Harvest 2016 is here as winter wheat and fall rye harvest has started in some areas of Manitoba. With favourable weather, crops are advancing quickly so now is a good time for a refresher on pre-harvest management!
As agronomists and producers, there are a few distinctions you need to be aware of between the pre-harvest herbicide products that are available for pre-harvest management. When done correctly, a pre-harvest application can provide a number of benefits including maximizing yield and quality, allow for direct combining of standing crops, perennial weed control and managing weed escapes from the growing season, and can speed up harvest timing.
However, it is critical to know the differences between the herbicide options to manage product expectations, and to ensure application is done correctly to make your crop export ready! The following are some key points to remember when considering your pre-harvest management.
- The most commonly used active ingredients used for pre-harvest management are glyphosate, diquat (ex. Reglone), saflufenacil (ex. Heat), carfentrazone (ex. Aim) and flumioxazin (ex. Valtera). There are also products that are pre-packaged mixes of active ingredients (ex. CleanStart with glyphosate and carfentrazone).
- Products such as Reglone or Heat are desiccants. GLYPHOSATE IS NOT A DESICCANT. Desiccants and glyphosate work very differently, usually require different application timings and parameters, and provide different benefits.
- Desiccants that contain diquat (e.g. Reglone, etc.) have been registered the longest in many crops and are the gold standard to which all other desiccants are compared. Diquat rapidly dries down green plant material, with desiccation typically occurring within hours to a few days. In fact, diquat fast acting nature sometimes works against itself, by limiting uptake by drying plant material, which is why the labels recommends applying these products at dusk or on cloudy days.
- Newer desiccants, such as Aim, Heat and Valtera, also result in the dry down of green plant material. Research has shown that Heat and Valtera are often just as or more effective than diquat for desiccating crops, and usually only take slightly longer to do so. Aim, on the other hand, is relatively slow acting, which makes it an ideal partner for glyphosate. And research has shown a synergistic effect when Aim and glyphosate are tank mixed (i.e. CleanStart), something not seen with other desiccants. Opposite to diquat, these desiccants are best applied on sunny, warm days.
- Coverage is important for these contact products, so be sure to keep water volumes up!
- GLYPHOSATE IS NOT A DESICCANT but can enhance dry down of crops. Research has shown that, compared with untreated crop, glyphosate can improve crop dry down after 7 to 14 days (depending on the weather). But glyphosate typically does not dry down crops as consistently or to the same extent as the true desiccants.
- However, glyphosate is a popular pre-harvest choice for many growers since, as the only systemic, is provides control/suppression of weeds, including winter annuals and perennials. Desiccants will also dry down green weeds, but only provide top growth control.
- Proper application timing is critical regardless of the product used. Always refer to and follow the product label for the correct timing and rates. Remember, desiccants or glyphosate neither bring about nor speed up crop maturity. However, it can decrease the time between when the crop has reached maturity and when the crop is harvested.
- Proper application timing is especially important for glyphosate. When applied too early, glyphosate residues could accumulate in the grain and may exceed Maximum Residue Limits (MRLs) of important export countries.
- Residues for the contact products (diquat, Aim, Heat and Valtera) are usually very low because of their contact nature. But that doesn’t mean that these products are without MRL concerns since, in many cases, residues tolerances can be exceeded simply because an MRL has not been established in all markets.
- Cereals Canada, Canola Council of Canada and Pulse Canada have information available through their “Keep it Clean” initiatives. Please refer to the following websites for additional information for meeting export standards, why MRLs matter, pre-harvest interval information, and herbicides that should not be used.
- Canola Council of Canada: http://www.canolacouncil.org/crop-production/keep-it-clean/ & http://www.spraytoswath.ca/
- Cereals Canada: http://www.cerealscanada.ca/keep-it-clean/
- Pulse Canada: http://www.pulsecanada.com/pulse-industry/market-access
Submitted by: Jeanette Gaultier, Provincial Weed Specialist, and Pam de Rocquigny, Provincial Cereal Crops Specialist, Manitoba Agriculture
Herbicide options for use as a harvest aid or desiccant before crop harvest are listed on Page 63 of the 2016 Guide to Field Crop Protection: https://www.gov.mb.ca/agriculture/crops/guides-and-publications/#gfcp